Awaro gateway update
The page reads your LoRaWAN gateway’s hardware variant and version, then installs the latest one while keeping your configuration.
In the browser Chrome / Edge
Online tools
The toolbox
Everything we use in the workshop to update, size and debug a sensor, in one place. No account, nothing to install: a browser is enough.
The calculators and the decoder run entirely in your browser: nothing is sent to a server, nothing is stored. The flashers use the USB port through Web Serial, available in Chrome, Edge and Opera.
Flash and update
Plug in over USB, click, done.
Flash an FGNode (LoRa / LTE)
Sensor node on ESP32-S3 (Heltec Wireless Stick Lite V3): pick the destination server, the version and the mode, then update or factory flash.
In the browser Chrome / Edge External site
Getting started with the RFLink 433 MHz gateway
433 MHz WiFi gateway (ESP32-C3 + RFM69HW): native USB mode, WiFi + MQTT mode, supported protocols, OTA updates.
Guide
Design and calculate
The three questions to answer before a sensor goes into the field.
How long will my battery last?
Measure, transmit, sleep: enter the three currents and the timings, the calculator gives the battery life in days and shows how to measure each phase with a multimeter.
In the browser
How long does my LoRa frame occupy the air?
Spreading factor, bandwidth, frame size: the airtime in milliseconds, the number of messages per hour you are allowed, and whether the European 1 % duty cycle is respected.
In the browser
What is inside this frame?
Paste the received bytes, pick the sensor (or describe the layout in one line): the decoder shows each value and the byte it comes from.
In the browser
Deploy
Before climbing on the roof with the gateway.
Awaro LoRaWAN coverage
Place the gateway on the IGN map (France), choose the mast height: the tool computes, from the terrain (LiDAR HD), the areas in view and the shadowed ones.
External site
Missing a tool?
Tell us what you are trying to do: if we already have it on the bench, we will put it online.